Fritsch PULVERISETTE 23 Bedienungsanleitung PDF herunterladen (Seite 17)

4.5 Electrical connection

Before establishing the connection, compare the voltage and current

values stated on the type plate of the power supply with the values of

the mains system to be used.

CAUTION!

Ignoring the values on the type plate may result in damage

to the electrical and mechanical components.

4.6 Changing the timer

By holding down the STOP button (for 5 seconds) you can access the

setup mode where the time fields hours/minutes or minutes/seconds

can be set. Using the +/- buttons, it is possible to set the timer to the

hours/minutes mode with 0 or to the minutes/seconds mode with 1.

Press the STOP button to return to the normal operating mode. The

device is factory set to the hours/minutes mode. It is essential to

observe the pause times to allow the device to cool when it is in contin-

uous operation for an hour or more or under high loads. When the

device is in operation for over 10 minutes the grinding bowl and the

device heat up significantly.

Installation

- 17 -

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 39 40

Keine Kommentare

Fritsch PULVERISETTE 23 Bedienungsanleitung Seite 17